| 1. Aguilar TONE HAMMER Preamp/Direct Box |
 | - (click here for sample settings) This preamp/direct box is so strong and powerful it could only be called the "Tone Hammer"! Based on the respected OBP-3 preamp, the Tone Hammer features fully sweepable midrange frequencies in addition to bass and ... more info |
|
| 2. Aguilar OBP-2TK 2 Band Onboard Bass Preamp - Separate Treble and Bass Pots |
 | The OBP-2 was designed to give bassists fat tone while being small enought fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. more info |
|
| 3. Aguilar GS 410 Bass Cabinet - 4 ohm |
 | The ultimate tone in a bass cab! This is a cabinet that can put out the big sound and handle the big amps. Plays tight and punchy, and is horn-loaded for all the edge you need. 4 ohms. Features: more info |
|
| 4. Aguilar DB 810 8x10 Bass Cabinet |
 | A thunderous combination of aggressive midrange with extended lows The Aguilar DB 810 bass cabinet is one of the loudest bass cabinets on the market, providing a Max SPL of 136 dB! Roll off the custom Aguilar tweeter for an aggressive "P Bass with a ... more info |
|
| 5. Aguilar GS 212 Bass Cab |
 | Tight and punchy. 2 - 12" cast frame woofers with 56 oz. magnets handle up to 600W and give you a solid, defined deep bass. A phenolic tweeter with integral phase plug lets you dial in just the right amount of edge. more info |
|
| 6. Aguilar GS 410 Bass Cabinet |
 | All the elements needed for awesome bass tone! From the 7-ply, void-free Phillipine mahogany construction to the 4 - 10" cast-frame woofers, this cabinet was designed to produce amazing sound. more info |
|
| 7. Aguilar OBP-3SK/PP 3 Band Onboard Bass Preamp |
 | The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. more info |
|
| 8. Aguilar OBP-2SK 2 Band Onboard Bass Preamp - Stacked Treble/Bass Pot |
 | The OBP-2 was designed to give bassists fat tone while being small enought fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. more info |
|
| 9. Aguilar OBP-3TK 3 Band Onboard Bass Preamp |
 | The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. more info |
|
| 10. Aguilar OBP-3TK/PP 3 Band Onboard Bass Preamp |
 | The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. more info |
|
| 11. Aguilar OBP-1 Bass Preamp |
 | The OBP-1's boost-only design gives you the tone-shaping benefits of active electronics without losing the inherent sound of the instrument. The OBP-1's discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment ... more info |
|
| 12. Aguilar OBP-3SK 3 Band Onboard Bass Preamp |
 | The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. more info |
|
